X-1	Slide Gate Operators
	AGS 900
	Handles Residential Gates Up to 20’ Feet in Length and Weighing Up to 375 Pounds. Standard Features: • Soft start/soft stop • Permanently lubricated double reduction gears box • Continuous duty motor • Push to open/Push to close operation • Adjustable obstruction sensing • Post mount installation • Includes receiver/transmitter • Electronic brake & clutch • One-half moving parts of typical operators • All mounting hardware included • Key switch emergency release
	Description	Part No.	Weight Ea.
	AGS 900 110v Unit	15020	81.00
	AGS 900 110v Unit w/ Full-Systems Capabilities Board*	15021	81.00
	*Full-Systems Capability Board has built-in timer and capabilities for external safety equipment.
	AGS 900 with Battery Backup (uses home plug-in transformer)	15030	100.00
	AGS 900 with Solar Package	15022	100.00
	OPTIONS: *Concrete pad stand
	AGS 900 ACCESSORIES
	Description	Part No.	Weight Ea.
	Concrete Pad Stand	15148	17.00
	Low Voltage Cable (Per Foot)	15125	.20
	AGS 2000
	For Use on Light Industrial Slide Gates Up to 20 Feet in Length and Weighing Up to 500 Pounds.
	STANDARD FEATURES: • Full systems capabilities (open, close, stop, safety, hold open timer) • Both direction electronic obstruction sensing • Soft start/soft stop • Electronic brake and clutch • One-half moving parts of typical operators • ½ HP Continuous duty motor and gear box • Adjustable hold open timer • All mounting hardware included
	Description	Part No.	Weight Ea.
	AGS 2000 – Medium Duty	15024	125.00
	OPTIONS: *Emergency battery opening system
	AGS 3000
	For Use on Light Industrial Slide Gates Up to 40 Feet in Length and Weighing Up to 1,500 Pounds.
	STANDARD FEATURES: • Full systems capabilities (open, close, stop, safety, hold open timer) • Both direction electronic obstruction sensing • Soft start/soft stop • Electronic brake and clutch • One-half moving parts of typical operators • ½ HP Continuous duty motor and gear box • Adjustable hold open timer • All mounting hardware included
	Description	Part No.	Weight Ea.
	AGS 3000 – Heavy Duty	15026	158.00

X-2	SWING GATE OPERATORS
	AGS 1400 LIGHT DUTY SWING GATE OPERATOR
	For Use on Residential Swing Gates Up to 13 Feet in Length and Weighing Up to 300 Pounds.
	STANDARD FEATURES: • Full systems capability (Open, Close, Stop, Safety, Hold open timer) • Both direction electronic obstruction sensing • Easy access cover – arm stays on for service • Soft start/soft stop • Continuous duty 1/3 HP motor • Adjustable hold open timer • Emergency disconnect • All mounting hardware included
	Description	Part No.	Weight Ea.
	AGS 1400 – Residential Swing	15027	127.00
	Options: • SuperARM™ Manual Release • Emergency battery opening system
	AGS 105 MEDIUM DUTY SWING GATE OPERATOR
	For Use on Residential Swing Gates Up to 15 Feet in Length and Weighing Up to 500 Pounds.
	STANDARD FEATURES: • Full systems capability (Open, Close, Stop, Safety, Hold open timer) • Both direction electronic obstruction sensing • Double reduction gear box • Soft start/soft stop • Continuous duty motor for unlimited cycles • Adjustable hold open timer • Emergency disconnect • All mounting hardware included
	Description	Part No.	Weight Ea.
	AGS 105 – Medium Duty Swing	15028	110.00
	OPTIONS: • SuperARM™ Manual Release • Solar package
	AGS 106 HEAVY DUTY SWING GATE OPERATOR
	For Use on Residential Swing Gates Up to 22 Feet in Length and Weighing Up to 1000 Pounds.
	STANDARD FEATURES: • Full systems capability (Open, Close, Stop, Safety, Hold open timer) • Both direction electronic obstruction sensing • Double reduction gear box • Soft start/soft stop • Continuous duty motor for unlimited cycles • Adjustable hold open timer • Emergency disconnect • All mounting hardware included
	Description	Part No.	Weight Ea.
	AGS 106 – Heavy Duty Swing	15029	168.00
	OPTIONS: • SuperARM™ Manual Release
	SUPERARM™
	Manual Release System for Swing Gate Operators Allows Emergency Entry From the Inside or the Outside *FIRE DEPARTMENT APPROVED*
	INCLUDES: • SuperARM™ w/ Pad lock • Secondary Arm • Shaft extension assembly for retrofitting operator various shaft sizes • Gate Bracket
	Description	Part No.	Weight Ea.
	Manual Release System	15069	60.00

X-3	ENTRY SYSTEMS
	RADIO RECEIVERS
	For Use With Transmitters • Includes Remote Antenna and 15’ Coax Cable.
	Description	Part No.	Weight Ea.
	Standard Receiver (0 to 500 foot range)	15087	.50
	Long Range Receiver*(0 to 500 foot range)	15095	1.50
	TRANSMITTERS
	Description	Part No.	Weight Ea.
	Standard Single Button	15088	.50
	Mini Single Button	15090	.25
	Dual Button	15089	.50
	PUSH BUTTON STATIONS
	For Indoor Use Weather resistant outdoor stations available on special quotation.
	Description	Part No.	Weight Ea.
	Single Button	15091	.30
	Dual Button	15092	.35
	Three Button	15093	.38
	STANDARD KEYSWITCH ENTRY SYSTEM
	• Mortise Cylinder • Rugged housing with Key Lock • Weather resistant design
	Description	Part No.	Weight Ea.
	Gooseneck Mount	15071	8.00
	KEYSWITCH ENTRY SYSTEM
	Description	Part No.	Weight Ea.
	Wall Mount	15098	3.00
	TOUCHPAD ENTRY SYSTEM
	• 120 code capacity • User prompted by visual lights and audible tones • 12 – 24 volts AC or DC • Programmable entry code length 2 to 6 digits • Weather resistant design
	Description	Part No.	Weight Ea.
	Gooseneck Mount	15084	8.00

X-4	ENTRY SYSTEMS
	STANDARD CARD READER ENTRY SYSTEM
	• Mechanical Operation – No power is required • Magnetic cards • Unlimited card capacity – All cards are identically coded • Weather resistant design NOTE: Cards not included.
	Description	Part No.	Weight Ea.
	Gooseneck Mount	15085	8.00
	PROGRAMMABLE CARD READER ENTRY SYSTEM
	• Programmable for up to 100 individually coded cards. • Easy to use programmer to void and validate cards • Available to handle up to 2000 individual cards at extra cost • Weather resistant design • 12 Volt AC NOTE: Cards not included.
	Description	Part No.	Weight Ea.
	Gooseneck Mount	15096	12.00
	POST AND GOOSENECK
	For Use With Entry Heads
	Description	Part No.	Weight Ea.
	Post and Gooseneck	15163	24.00
	LOOP DETECTOR
	Description	Part No.	Weight Ea.
	Loop Detector	15077	3.00
	Pre-Made Exit Loop	15097	6.00
	Pre-Made Safety Loop Set (Includes 2 Loops)	15099	12.00
	TRANSMITTER SAFETY EDGE PACKAGE
	Package includes: Safety Edge, Air Switch, Waterproof Transmitter and Receiver.
	Description	Part No.	Weight Ea.
	Eliminates need for retractable card	15165	6.00
	BUMPER EDGE
	Description	Part No.	Weight Ea.
	No Safety Device	15166	3.00

X-5	ENTRY SYSTEMS
	PHOTO ELECTRIC CELL
	Used As Open or Safety Device NOTE: Photo Electric Cell detects interference between Reflector and Photo Cell unit
	Description	Part No.	Weight Ea.
	Photo Electric Cell	15078	3.00
	TRAFFIC BARRIERS
	STANDARD FEATURES: • Full systems capability (Open. Close, Stop, Safety, Hold open timer.) • Automatic reversing • 100% solid state • All mounting hardware included
	Description	Part No.	Weight Ea.
	Barrier w/ 10’ Arm	15067	200.00
	OPTIONS: • 12, 14, or 16 foot arm • Folding Arm for Ceiling Height Limitations
	SECURITY TURNSTILES
	• Hot dip galvanized coating • Use in place of a gate for extra security NOTE: Call for quotation on special turnstiles. Available in two-way, motorized, and specialty coatings. Custom turnstiles also available.
	Description	Part No.	Weight Ea.
	M.S.T. Turnstile	81750	475.00
	1988 M.S.T. (Maximum Security Turnstile) one-way passage only. Designed for easy installation and pedestrian traffic only (Will not allow wheelchairs.)